Best House and Home Apps for Linux of 2022 May

This list is about the Best House and Home Apps for Linux. We will try our best so that you understand this list Best House and Home Apps for Linux. I hope you like this list Best House and Home Apps for Linux. So lets begin:

Table of Contents: Best House and Home Apps for Linux

As technology advances, there are always new gadgets and inventions that make our daily lives easier. In recent years, automation has increased significantly. Machines take over most of the tasks performed by humans. The most obvious example of this is the smart home or home automation. Home automation allows you to control the devices in your home through a mobile device from anywhere in the world.

The term can be used to describe individual programmable devices such as thermostats and sprinkler systems, but home automation generally describes homes where nearly all lights, appliances, outlets, heating and cooling systems are connected to a remotely controllable network. . When it comes to home security, this includes your alarm system, as well as all doors, windows, locks, smoke detectors, security cameras, and any other sensors that are connected to it.

Automated houses have become relatively popular recently. Home automation is a wonderful and revolutionary technology that has changed the way people live. Good home automation software should be easy to use, as the majority of the audience is not tech-savvy and is made up of different age groups and backgrounds. Below is a list of some open source home automation software.

Best Home and Home Apps for Linux


The Open Home Automation Bus is a technology-independent, open source home automation platform that runs as the center of your smart home. When home automation seems to work easily, it is always the result of hard work. Home automation is fascinating and requires a significant investment of your time. Remember that openHAB is just a computer program.

The computer will only do what you tell it to do. openHAB can provide many standard solutions that are easy to configure. On the other hand, the more you insist that everything looks and works exactly how you want it, the more work you have to do. openHAB is fully customizable, but that requires significant effort on your part.

home assistant

Home Assistant is free and open source home automation software designed to be a central control system for smart home devices with an emphasis on local control and privacy. Home Assistant OS is an operating system specially designed to run Home Assistant on single board computers and x86-64 systems. Its goal is to provide a robust and maintenance-free operating system to run Home Assistant. The Home Assistant Operating System (HAOS) uses the Buildroot build system. Buildroot is not a Linux distribution in the traditional sense.

It provides the infrastructure and build system to create a Linux distribution. Buildroot allows us to build for different architectures, which is especially useful when building for architectures that typically have fewer resources, such as arm-based systems.

Open Motics

OpenMotics is an open, modular, hardwired, and affordable hardware and software platform for automating a home, building, or neighborhood. Provides a total solution by automating all the devices and systems in your home, building, or neighborhood and bringing them together on a single platform. It also allows you to live more energy efficiently by providing information and predicting your consumption patterns. OpenMotics is a complete open source home automation platform.

This software unlocks all aspects of home and building automation: schematics, PCB files, bill of materials, firmware source code, software source code, and the various protocols used are completely open source. The OpenMotics home automation platform consists of various hardware components: Various components installed in the fuse box, called modules. Each of these modules has a specific function within the home automation system. Environmental sensors that provide temperature, humidity and/or light data to the system.


Jeedom supports various protocols such as Z-Wave, RFXCOM, RTS SOMFY, EnOcean, xPL, etc. The plugin system ensures compatibility with many current and future protocols through the Jeedom Market. Jeedon has its own Market, just like the one you can find on your smartphones in the App Store or Play Store.

It allows you to add home automation features and ensure compatibility with new home automation modules, but also to customize the fixed and mobile interfaces. As a developer, you can also publish your creations on the Jeedom marketplace and get paid if you want.


ioBroker is an integration platform for the Internet of Things that focuses on building automation, smart metering, ambient assisted living, process automation, data visualization and logging. ioBroker defines some common rules for a couple of databases that are used to exchange data and post events between different systems. The systems are connected to the ioBroker databases through so-called adapters.

These are technical processes that run anywhere on the network and connect all kinds of systems to ioBrokers databases. A connection to ioBrokers databases can be implemented in almost any programming language on almost any platform, and an adapter can be run on any host capable of reaching the databases over an IP network.

AGO control

AGO Control is a simple open source board to automate your device, designed for embedded systems like Raspberry Pi. It is easy to set up and has a simple user interface. It allows you to control your devices faster than any other home automation platform.

The reason AGO is so fast is because of its simplicity. You can connect a wide range of devices and control them. Uses command line logging. Supports many devices like KNX/EIB, 1wire, Z-Wave, MySensors, Onkyo AV Receivers and many more.


Calaos is a complete solution for home automation. Initially it was a system developed by a French company of the same name. When the company closed in 2013, the entire code base was released as open source and under the GPL license. A small community has formed around the project to continue development.

Calaos is a Linux based home automation software released under GPLv3 license that works on Raspberry Pi, some Allwinner platforms like Cubiebaord 1/2, Mele A1000(G)/A2000 and x86 and amd64 hardware platforms to control switches and lights. . in the rooms of your home or office, control your music and manage security cameras.


pimatic is described as a “home automation framework that runs on node.js” and is an app in the development category. There are four alternatives to pimatic for a variety of platforms, including Linux, Mac, Windows, online/web-based and self-hosted solutions.

The main focus of this framework is flexibility: it is relatively fast and “easy” to implement. Thanks to its built-in features, you can instantly automate tasks by connecting your home devices and adding conditional rules.

HomeBridge is a JavaScript (NodeJS) based application that allows you to integrate various smart home devices such as smart light bulbs, thermostats, motion sensors, etc. It is not natively supported by the Apple Home Kit. Several smart home products go through rounds of testing and meet the safety guidelines set by Apple to be directly compatible with Home-kit.

Those who want to create smart homes based on Apple Home-Kit and still add devices that are not part of the Apple ecosystem can use HomeBridge. HomeBridge is an open source initiative that anyone can participate in for free. Its concept is simple: it compiles a list of all devices that are not Apple HomeKit certified. So we can use the Home app to monitor every smart device in our building.

Designer Home Suite

Home Designer Suite is primarily aimed at professional architects and interior designers and is definitely one of the most comprehensive home design software you will find. If budget is not an issue, you should give it a try. The software is capable of handling all types of residential and commercial construction projects. As you draw elements (walls, for example), the software automatically creates a 3D model.

You can generate a bill of materials and use powerful construction tools to create construction documents with site plans, structure plans, section details, and elevations. 3D rendering and viewing features allow you to view the created models from different angles. You can also explore 360-degree spherical views locally and in the cloud and embed them in websites for interactive navigation. For cross sections and elevations, the software can add automatic labels and populate camera labels with layout information.

Final words: Best House and Home Apps for Linux

I hope you understand and like this list Best House and Home Apps for Linux, if your answer is no then you can ask anything via contact forum section related to this article. And if your answer is yes then please share this list with your family and friends.


Leave a Reply

Your email address will not be published.